Features

Digital LED Strip 60Led 60pixels ws2811 ws2812 sk6812 Dc5V with loop circuit(signal input and signal output on same side)

Introduction

Led type: 5050 SMD RGB LED
IC type: ws2811
PCB Width:10mm
Led lighting angle: 120°
LED Q'ty:  60led/m ; 6 0Pixels/m

with loop circuit to make 4pin cable

GND:  Black  Dc5V : Red   Data :  Green  W(loop curcuit): Blue 

IP Rating IP20, IP65, IP67, IP68.

• IP20 Non-waterproof with 3M sticker on the back,
• IP65 waterproof is silicone gel or epoxy on the surface,
• IP67: silicone tube,(silicone sheathing ),
• IP68: silcone gel(or epoxy) inside silicone tube.

Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;

Advantages:

1.PWM refresh rate: 800kHz, transfer speed 800k bps.

2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3. each led individually addressable,each led can be cut .

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . ever 1 LEDcan be cut,cutting unit :16.67mm

7. 5V low voltage inputted , don't over 6V , otherwise you will destroy the entire strip .

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

Product details

Video show