SP107E DC5V~24V Remote LED Pixel Controller Led Light Dimmer Bluetooth Music Controller
Product Specification |
Voltage | DC5V-24V |
Working current | 18mA~45mA |
Control capacity | 960 pixels |
Output signal | SPI signal |
Built-in pattern | (18+30)musice+180 non-music |
Control mode | Bluetooth App control |
RGB sequence | Upper computer adjustable |
Working temperature | -25 ° C -85 ° C |
Net weight |  65g |
Support IC |  Support common LED driver ICs on the market |
  1. Features:
1. Long distance APP remote control via Bluetooth;
2. Support almost every kind of one-wire or two-wires LED driver IC ;
3. Support setting pixel number and segment number, support up to 960 pixels;
4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects
and 180 kinds of non-music effects;
5. DC5V~24V wide range working voltage, reverse power supply input protection;
6. User setting saving;
2. App control:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Searchâ€LedShopâ€Â in App Store or Google pay or scan this QR code to download and install the App:
3. Instructions:
APP Operations:
1. Make sure you have turned on Bluetooth on your phone;
2. Open the APP, drag to refresh the device list, select device name “SP107E†to connect the controller, once connected you will able to rename your controller;
3. Select RGB order and IC type;
4. Adjust the pixel number;
5.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN, and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN†jack, connect the audio output source(MP3, Phone or tablet…)and the speaker(or headset), the controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, the controller will automatically switch into microphone input mode.
4. Wire Connection:
Â
take noted the sp107e led music controller work with dmx512 led stripÂ
just need to connect Date and clock only,same as followÂ