Dc24V 12V flex dmx digital RGB RGBW led strip 60leds/M
Brand: Rose Lighting
Product Code: WS-1243
133 in stock.
Features
Dc24V 12V flex dmx digital led strip 60leds/M
Our DMX RGB flexible led strip is super strong dmx signal strip with A,B signal parallel signal transfer. 5 cables ( PI/PO address writing wire, A(Dmx+),B(Dmx-),GND),
and  DC24V,the MAX485 is inside the DMX512 IC ,It can be cut ,can be parallel and series connection .
Product details
Product Name
RL-STR-dmx512-5050RGB-60-12V/24V
LED Qty
60leds/m
DMX512 Qty
10 pcs with 24VÂ Â 20pcs with 12VÂ
DMX channel
30 channels with 24VÂ Â 60channels with 12VÂ
PCB Width
12mm wide
Voltage
DC24VÂ Dc12VÂ
Watt
14.4W
PCB Color
White PCB Black PCB
IP Rating
IP20/IP65/IP67/IP68
Controller
DMX512 Art-Net/DVI/DMX Controller
Product Keywords
Dc24V 12V flex dmx digital led strip 60leds/M
key specification
1. This Dc24V 12V flex dmx digital led strip 60leds/M ,that different with normal SPI led pixel strips. DMX512 led strips protocl is DMX512 that signal is parallel not series.
2. Its advantage is parallel DMX512 signal could avoid LEDs color influenced by the failure of one light in serial connection.
2. Entire DMX RGB digital led strip has 10 pixels with 24V ;20pixels with 12V , 60 RGB leds in a meter with 12mm width pcb board.
3. Communication between DMX512 RGB led digital tapes are synchronized perfectly under support of Artnet / DMX512 led controllers.
4. 24V 60 leds DMX RGB LED Pixel Digital strip need to write DMX address code via DMX address coder / controller.
5. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.
6. 24V 60 leds DMX RGB LED Pixel Digital ribbon is flexible , bright, durable and easy for installation.
For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip,
there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.
Advantages:
2unce PCB board with double cooper layer(hongqi brand 35um copper )
doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board
 It comes in 1 meters per reel with 5Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
Flexible PCB material . ever 3 LEDcan be cut with 12V; every 6LED cab be cut with 24V;
60LEDs/M with 12VÂ . 12V low voltage inputted , don't over 13V , otherwise you will destroy the entire strip .
60LEDs/M with 24VÂ . 24V low voltage inputted , don't over 25V , otherwise you will destroy the entire strip .
warranty: 3years
Original UCS512 C3 IC chip or TM512AC with standard dmx512 signal ,,
Installing : screw+silicon clipand 3M adhesive on back side for sticky
Packaging
5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20
Waterproof IP gradeÂ
IP20 Non-waterproof with 3M sticker on the back, Size:5000*12*2.5mm
IP65 waterproof is silicone gel or epoxy on the surface,Size:5000*12*3mm