K8000L  Console - SPI Decoder/controller system features:

1. 32 to 65536 degree Gray control, Gamma correction procession handle.

2. Support various point, line light source, and all kinds of rules and specific shaped handle.

3. The controller has eight ports output, each port can support up to 512/1024 lights (DMX lights can support up to 512 pixels).

4. The playback content stored in SD card, the SD card can store up to 16 files, SD cared capacity supports 128MB-32GB, support FAT and FAT32 format.

5. The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M² pure copper power cord.

6. Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.

7. Enhanced 485 TTL and 485 differential (DMX) signal output.

8. The controller inset effects has 16 kinds:(Internal control default chip is 1903).

Notes: 1. The controller support lights 512 points pixel, speed can reach up to 30 frames / sec, 768 point pixel speed can reach up to 25 frames / sec, 1024 point pixel speed is about 22 frames / sec (the above parameter is an example of 1903 agreement IC, different IC have difference)

 

2. International standard DMX512 (1990 agreement) maximum support 512 pixels. When the load is international standard 170 pixels, the speed can reach up to 30 frames / sec, 340 pixels speed is about 20 frames / sec, when 512 pixels speed is about 12 frames / sec.

 

2. Support chips(PC Software Select K-8000-RGB):

 

UCS1903,SM16716,LX1003,WS2801,LPD1886,TM1913,TM1914,P9883,DMX512,DMX512 high speed, DMX512 pure forwarding,DMX512 pure forwarding high speed, INK1003,APA102,UCS5603A&B

NOTE: 1. The controller can not support RGBW lights.

 

3.  Screen print meaning:  

 

Signal output (TTL/245 signal):

 

 

    

 

 

 

Signal output (DMX512 signal):

 

 

    

  

 

 

 

Channel introduction when connect the control table:

 

 

4. Specific parameter:    

 

 Memory card:

         Type: SD card

          Capacity:  128MB-32GB

          Format:FAT or FAT32 format

          Storage files: *.led

 

 Physical parameter:

         Working temperature:-20℃-85℃

          Working power:AC 100-240V input

          Power consumption: 5W

      Weight: 1.5Kg

      Size: