Narrow 4mm pcb WS2811/WS2812B/SK6812 Mini 3535 Addressable LED Strip 60pixels/m
Brand: Rose Lighting
Product Code: WS-1207
89 in stock.
Features
Narrow 4mm pcb WS2811/WS2812B/SK6812 Mini 3535 Addressable LED Strip 60pixels/m
Describe:
- Control IC included, supporting numerous Color-change effects; - Pcontrol by SD controller,Arduino,DMX512,Artnet; - Flexible PCB 5V low voltage input; - 60pixels per meter; - Absolutely addressable ,each IC built inside RGB LED; - 5M per roll,also Customer's length available;
-SK6812 3535 lamp is a mini type of Built-in lamp he is three line , Date and Clock together on one lines
smd3535 60 leds ws2812b led strip,sk6812 smd3535 60leds,mini smd3535 5mm led strip ;sk6812 5mm pixel led strip
1. So thin. So mini. So teeeeeeny-tiny. It's the ‘skinny' version of our classic digital Pixel strips that different with the standard 5050 led pixel stirps. LED size is only 35x35mm.
2. These sk6812mini skinny SMD3535 digital Pixel strip is 60 digitally-addressable pixel Mini LEDs per meter and are very affordable and are only 7.5 mm wide, 5 mm bare flexible board if you remove the strip from the casing. Strips are available with black and white flex PCB.
3.  There are 30 and 144 RGB sk6812 mini 3535 LEDs per meter on sell too, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).
4.  The 5mm width mini skinny 3535 led digital strip 60led/m is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.66″/17mm (1 LED each). Solder to the 0.1″ copper pads and you're good to go. Of course, you can also connect strips together to make them longer.
5. If 5mm width mini skinny 3535 led digital strip 60led/m does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
6. Please note, do not power than DC6V input, if that will destory entire led strips.
Waterproof Rate:
IP20 Non-waterproof with 3M sticker on the back
IP65 waterproof is silicone gel on the surface
IP67: silicone tube/coating
IP68: silcone gel(or epoxy) inside silicone tube.
Connection guide
SPI signal:Â LED Strip+LED power supply +LED controller
DMX control:Â LED Strip+LED pwer supply+DMX Controller+DMX decoder
LED controller:Â T- series SD card controller, RF remote controller, DMX controller, Arduino.
(offline / PC online)
LED power suppply: power supply, T- series, A- series power supply…(waterproof / non-waterproof)