Features
DC5V Individually Addressable 5050 RGB LED Strip HD107s 60leds/M  60leds/M 27K HZ PWM refersh rate and  Max transfer speed is 40M bpsÂ
Key specification
Fastest pixel rgb LED Strip
Led type:5050 SMD LED
IC type: HD107s
PCB Width:10mm
Led lighting angle: 120°
LED Qty: 30leds/m, 60leds/m, 72leds/m, 96leds/m, 144leds/m
IP Rating IP20, IP65, IP67, IP68.
Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;
Advantages
- PWM refresh rate:27kHz,(Original apa102 with 20K HZ,sk9822 with 4.7K HZ,sk6812/ws2812B with 400 HZ only)
- Oscillator frequency: 40Mhz(apa102 with PWM frequency20M HZ,sk9822 with 2MHZ,sk6812/ws2811 with 800K HZonly)
- Pure copper bracket and 99.99% Gold wire for HD107Pixel LED chip
- 256 Gray scale(8bits) 16bits optional
- 2 sides membrane cover the PFCB.Make sure the copper no drop from the pcb board
- It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
- 30leds/m,48leds/M 60leds/m, 72leds/m, 96leds/m, 144leds/m . 5V low voltage inputted , don't over 6V , otherwise you will destroy the entire strip .
- Hongqi brand 2OZ FPCB(35um cooper)with double cooper layer,
- HD107s led strip with double signal ,one pixel borken ,no affect the next one working
- The HD107s LED is low consumptionand high energy saving ( with Built-in dormancy Mode inside )
- The HD107sled lights up looks like linear lighting ,large lighting beam
Installing :
non-waterproof: with 3M adhesive on back side for sticky; waterproof: screw+silicon clip, or 3M adhesive back side.
Controller system:
1.Offline controllers, online controller work with computer,Such as LEDedit,
2.DMX console ,
3.Madrix software & map and any other artnet software.
4.Also the singlechip,such as the Arduino.
Waterproof TypeÂ
IP20Â non waterproof:3M sticker on the back, easy installation.
IP65Â waterproof: Silcone gel or epoxy on the surface,3M sticker on the back.
IP67Â waterproof: Silicone tube, equipped with card buckle and screw.
IP68 waterproof: Silicone gel or epoxy inside silicone tube,equipped with card buckle and screw.
Applications:
Widely used for decoration use, hotels, clubs, shopping malls,night bar, disco
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Backlighting, concealed lighting, channel letter lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile and bicycle decoration, border or contour lighting
Diemension
Â
All kinds of Pixel LED chip difference as follow
Chipset | type = LEDTYPE. | DATA (R6) | CLK (R7) | Color Bits | Data Rate | PWM Rate |
apa102C(fake apap102) | apa012C | √ | √ | 8 | 20Mbps | 20kHz |
WS2801 | WS2801 | √ | | 8 | 1Mbps | 2.5kHz |
WS2812/ws2811 | WS2812/ws2811 | √ | | 8 | 800kbps | 400Hz |
SK9822 | SK9822 | √ | √ | 8 | 15Mbps | 4.7kHz |
APA107 | APA107 | √ | √ | 8 | 30Mbps | 9kHz |
HD107S | HD107S | √ | √ | 8,16 | 40Mbps | 27khz |
APA102(original type) | APA102 | √ | √ | 8 | 20Mbps | 20khz |
GS8208 | GS8208 | √ | | 12 | 800kbps | 6kHz |
TM1804 | TM1804 | √ | | 8 | 800kbps | 800Hz |
UCS1903 | UCS1903 | √ | | 8 | 800kbps | 800HZ |
P9813 | P9813 | √ | √ | 8 | 1-15Mbps | 4.5kHz |
sk6812 | sk6812 | √ | √ | 8 | 800k bps | 800 HZ |
ws2815 | ws2815 | √ | | 18 | 800kbps | 800Hz |
Â
Â