Dc24V 4040 SMD RGB flexible led strip 120 leds/m Dc12V 8mm or 10mm width optional
Brand: Rose Lighting
Product Code: WS-1247
About this item
5050 SMD RGB flexible led strip
•5050 RGB Flexible LED Strip
•Color: RGB
•LED Quantity: 30/60/72/120/240 leds/Meter
•Size: L500cm (5M)
•View angle:120°
•Working Input Voltage: 5/12/24VDC
•Working Tempreture:-20° to 50°
•Drive Mode:Contant Voltage
131 in stock.
Features
Dc24V 4040 SMD RGB flexible led strip 120 leds/m Dc12V 8mm or 10mm width optional
Â
Product Parameter
    PN
  RL-STR-4040RGB-120-12V-8mm
   Voltage
  Dc24V
  LED Type
 RGB 4040  SMD
   LED Quantity
  120 leds/m
  Color
  RGB
  Dimension
  5000*10 MM/8mm optional
  Cutting unit
  3led with12V         丨
   PCB Color
   White/
  Power
  24w/m
  Protocol
   PWM
  warranty
  3years
Â
Â
Description
This is a PWM control RGB color LED strip without Pixel SMD RGB 4040 RGB LEDs ,
5meters/reel, 5mm PCB width The cutting unit length is every 3 led (12V), The PCB is made by 2 Ounce thick copper All soldering Pads are very large, allowing you to easily cut and reconnect DC12/24V constant voltage operation Both ends have 4pin bare wires for powering 3M tape attached on backside of FPC 4 different waterproof types IP22, IP65, IP67,Ip68
Application:
•Widely used for home decoration use, hotels, clubs, shopping malls
•Decorative lights for holiday, event, show exhibition
•Applicable for automobile and bicycle decoration, border or contour lighting
Features:
•Superbright 4040 SMD top LED, high intensity and reliability.
•Long life span 50,000+ hours
•Cuttable every 3/6 LEDs along the cutting marks, according to pratical requirement.
•Flexible ribbon for curving around bends
•Low power consumption
.Installing : non-waterproof: with 3M adhesive on back side for sticky; waterproof: screw+silicon clip, or 3M adhesive back side.
Â
Â
waterproof Type
IP65 with silcome glue add 0.5USD per meter . IP67 with silcone tube add usd 0.5 per meter . IP68 with injectioned silcione gel add 1.0 USD per meter
Remark
Do not use any acidic, alkaline adhesive fixing Product
It is prohibited to make products with a hard object collision, friction Do not use your fingers to press LED Don't make positive and negative reversed Don't install when product is working Installation, repair and maintenance must be made by professional Person Before you use them make sure the power supply voltage to meet the requirements and wire connection correctly