Features

RGBW 4in 1 5050 flex LED Strip Dc12V Dc24V 60leds/m 

specification 

RGBW led chip is the new chip,which have R,G,B,W four color chips inside one 5050 SMD LED.

The white color is much puerer and higher brightness.Can be controlled by wifi remote and cell phone(Android ,IOS).Change any color and dimmable as you want at any time.Can be DC12V,DC24V,

60leds  LEDs per meter.

RGBW(White coloe insde could be warm white:2800-3200K,nature white:4000-4500K,white:6000-6500K. )

LED Type: SMD 5050 RGBW

Color: warm white, white, nature white

LED Quantity: 60leds/Meter,

View angle:120°

PCB width: 12MM

Working Input Voltage: 12V or 24V

Drive Mode: Contant Voltage

Description

This is a PWM control RGB color LED strip without Pixel
SMD RGBW 5050 LEDs ,

5meters/reel, 12mm PCB width
The cutting unit length is 50mm(12V), or 100mm(24V) per section
The PCB is made by 2 Ounce 35um  thick copper
All soldering Pads are very large, allowing you to easily cut and reconnect
DC12/24V constant voltage operation
Both ends have 4pin bare wires for powering
3M tape attached on backside of FPC

Installing : non-waterproof: with 3M adhesive on back side for sticky; waterproof: screw+silicon clip, or 3M adhesive back side.

 

Product details

 

waterproof Ip68

 

 

 

 

 

 

 

 

Waterproof Rate:

IP20: Non-waterproof with 3M sticker on the back,

IP65: waterproof is silicone gel or epoxy on the surfacewith 3M sticker on the back,

I67: silicone tube

I68: silicone glue inside the silicone tube

Application:

•Widely used for home decoration use, hotels, clubs, shopping malls

•Architectural decorative lighting, boutique atmosphere lighting

•Extensively applied in background lighting, concealed lighting, channel letter lighting

•Emergency & security lighting, advertisement sign lighting

•Decorative lights for holiday, event, show exhibition

•Applicable for automobile and bicycle decoration, border or contour lighting

Remark

Do not use any acidic, alkaline adhesive fixing Product

It is prohibited to make products with a hard object collision,
friction
Do not use your fingers to press LED
Don't make positive and negative reversed
Don't install when product is working
Installation, repair and maintenance must be made by
professional Person
Before you use them make sure the power supply voltage
to meet the requirements and wire connection correctly

Video show